Percona XtraDB Cluster provides an active/active MySQL
compatible alternative implemented using the Galera
synchronous replication extensions.
Percona XtraDB Cluster is a high availability and high scalability solution for
MySQL clustering. Percona XtraDB Cluster integrates Percona Server with the
Galera library of MySQL high availability solutions in a single product package
which enables you to create a cost-effective MySQL cluster.
This charm deploys Percona XtraDB Cluster onto Ubuntu.
To deploy this charm:
juju deploy percona-cluster
Passwords required for the correct operation of the deployment are automatically
generated and stored by the lead unit (typically the first unit).
To expand the deployment:
juju add-unit -n 2 percona-cluster
See notes in the 'HA/Clustering' section on safely deploying a PXC cluster
in a single action.
The root password for mysql can be retrieved using the following command:
juju run --unit percona-cluster/0 leader-get root-password
This is only usable from within one of the units within the deployment
(access to root is restricted to localhost only).
Percona Cluster is extremely memory sensitive. Setting memory values too low
will give poor performance. Setting them too high will create problems that are
very difficult to diagnose. Please take time to evaluate these settings for
each deployment environment rather than copying and pasting bundle
The Percona Cluster charm needs to be able to be deployed in small low memory
development environments as well as high performance production environments.
The charm configuration opinionated defaults favor the developer environment in
order to ease initial testing. Production environments need to consider
carefully the memory requirements for the hardware or cloud in use. Consult a
MySQL memory calculator  to understand the implications of the values.
Between the 5.5 and 5.6 releases a significant default was changed.
The performance schema  defaulted to on for 5.6 and later. This allocates
all the memory that would be required to handle max-connections plus several
other memory settings. With 5.5 memory was allocated during runtime as needed.
The charm now makes performance schema configurable and defaults to off (False).
With the performance schema turned off memory is allocated when needed during
run time. It is important to understand this can lead to run time memory
exhaustion if the configuration values are set too high. Consult a MySQL memory
calculator  to understand the implications of the values.
Particularly consider the max-connections setting, this value is a balance
between connection exhaustion and memory exhaustion. Occasionally connection
exhaustion occurs in large production HA clouds with max-connections less than
2000. The common practice became to set max-connections unrealistically high
near 10k or 20k. In the move to 5.6 on Xenial this became a problem as Percona
would fail to start up or behave erratically as memory exhaustion occurred on
the host due to performance schema being turned on. Even with the default now
turned off this value should be carefully considered against the production
requirements and resources available.
When more than one unit of the charm is deployed with the hacluster charm
the percona charm will bring up an Active/Active cluster. The process of
clustering the units together takes some time. Due to the nature of
asynchronous hook execution it is possible client relationship hooks may
be executed before the cluster is complete. In some cases, this can lead
to client charm errors.
To guarantee client relation hooks will not be executed until clustering is
completed use the min-cluster-size configuration setting:
juju deploy -n 3 percona-cluster juju config percona-cluster min-cluster-size=3
When min-cluster-size is not set the charm will still cluster, however,
there are no guarantees client relation hooks will not execute before it is
Single unit deployments behave as expected.
There are two mutually exclusive high availability options: using virtual
IP(s) or DNS. In both cases, a relationship to hacluster is required which
provides the corosync back end HA functionality.
To use virtual IP(s) the clustered nodes must be on the same subnet such that
the VIP is a valid IP on the subnet for one of the node's interfaces and each
node has an interface in said subnet. The VIP becomes a highly-available API
At a minimum, the config option 'vip' must be set in order to use virtual IP
HA. If multiple networks are being used, a VIP should be provided for each
network, separated by spaces. Optionally, vip_iface or vip_cidr may be
To use DNS high availability there are several prerequisites. However, DNS HA
does not require the clustered nodes to be on the same subnet.
Currently the DNS HA feature is only available for MAAS 2.0 or greater
environments. MAAS 2.0 requires Juju 2.0 or greater. The clustered nodes must
have static or "reserved" IP addresses registered in MAAS. The DNS hostname(s)
must be pre-registered in MAAS before use with DNS HA.
At a minimum, the config option 'dns-ha' must be set to true and
'os-access-hostname' must be set in order to use DNS HA.
The charm will throw an exception in the following circumstances:
If neither 'vip' nor 'dns-ha' is set and the charm is related to hacluster
If both 'vip' and 'dns-ha' are set as they are mutually exclusive
If 'dns-ha' is set and os-access-hostname is not set
Network Space support
This charm supports the use of Juju Network Spaces, allowing the charm to be bound
to network space configurations managed directly by Juju. This is only supported
with Juju 2.0 and above.
You can ensure that database connections and cluster peer communication are bound to
specific network spaces by binding the appropriate interfaces:
juju deploy percona-cluster --bind "shared-db=internal-space,cluster=internal-space"
alternatively these can also be provided as part of a juju native bundle configuration:
percona-cluster: charm: cs:xenial/percona-cluster num_units: 1 bindings: shared-db: internal-space cluster: internal-space
The 'cluster' endpoint binding is used to determine which network space units within the
percona-cluster deployment should use for communication with each other; the 'shared-db'
endpoint binding is used to determine which network space should be used for access to
MySQL databases services from other charms.
NOTE: Spaces must be configured in the underlying provider prior to attempting to use them.
NOTE: Existing deployments using the access-network configuration option will continue to function; this option is preferred over any network space binding provided for the 'shared-db' relation if set.
Note that Percona XtraDB Cluster is not a 'scale-out' MySQL solution; reads
and writes are channelled through a single service unit and synchronously
replicated to other nodes in the cluster; reads/writes are as slow as the
slowest node you have in your deployment.
- (string) Network interface on which to place the Virtual IP.
- (string) Location on the filesystem where binlogs are going to be placed. Default mimics what mysql-common package would do for mysql. Make sure you do not put binlogs inside mysql datadir (/var/lib/mysql/)!
- (string) Valid values are 'safest', 'fast', and 'unsafe'. If set to 'safest', all settings are tuned to have maximum safety at the cost of performance. 'fast' will turn off most controls, but may lose data on crashes. 'unsafe' will turn off all protections but this may be OK in clustered deployments.
- (string) Sets the max_binlog_size mysql configuration option, which will limit the size of the binary log files. The server will automatically rotate binlogs after they grow to be bigger than this value. Keep in mind that transactions are never split between binary logs, so therefore binary logs might get larger than configured value.
- (string) The IP address and netmask of the 'access' network (e.g. 192.168.0.0/24) . This network will be used for access to database services.
- (string) Virtual IP to use to front Percona XtraDB Cluster in active/active HA configuration
- (int) Configure the InnoDB IO capacity which sets an upper limit on I/O activity performed by InnoDB background tasks, such as flushing pages from the buffer pool and merging data from the change buffer. . This value typically defaults to 200 but can be increased on systems with fast bus-attached SSD based storage to help the server handle the background maintenance work associated with a high rate of row changes. . Alternatively it can be decreased to a minimum of 100 on systems with low speed 5400 or 7200 rpm spindles, to reduce the proportion of IO operations being used for background maintenance work. . For more details https://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_io_capacity
- (int) Sets table_open_cache (formerly known as table_cache) to mysql.
- (string) Configure whether InnoDB performs change buffering, an optimization that delays write operations to secondary indexes so that the I/O operations can be performed sequentially. . Permitted values include . none Do not buffer any operations. inserts Buffer insert operations. deletes Buffer delete marking operations; strictly speaking, the writes that mark index records for later deletion during a purge operation. changes Buffer inserts and delete-marking operations. purges Buffer the physical deletion operations that happen in the background. all The default. Buffer inserts, delete-marking operations, and purges. . For more details https://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_change_bufferring
- (string) The IP address and netmask of the cluster (replication) network (e.g. 192.168.0.0/24) . This network will be used for wsrep_cluster replication.
- (string) Repository from which to install. May be one of the following: distro (default), ppa:somecustom/ppa, a deb url sources entry, or a supported Ubuntu Cloud Archive e.g. . cloud:<series>-<openstack-release> cloud:<series>-<openstack-release>/updates cloud:<series>-<openstack-release>/staging cloud:<series>-<openstack-release>/proposed . See https://wiki.ubuntu.com/OpenStack/CloudArchive for info on which cloud archives are available and supported.
- (int) Default multicast port number that will be used to communicate between HA Cluster nodes.
- (int) Sets the expire_logs_days mysql configuration option, which will make mysql server automatically remove logs older than configured number of days.
- (boolean) Turns on MySQL binary logs. The placement of the logs is controlled with the binlogs_path config option.
- (string) Default network interface on which HA cluster will bind to communication with the other members of the HA Cluster.
- (string) A comma-separated list of nagios service groups. If left empty, the nagios_context will be used as the servicegroup
- (boolean) The performance schema attempts to automatically size the values of several of its parameters at server startup if they are not set explicitly. When set to on (True) memory is allocated at startup time. The implications of this is any memory related charm config options such as max-connections and innodb-buffer-pool-size must be explicitly set for the environment percona is running in or percona may fail to start. Default to off (False) at startup time giving 5.5 like behavior. The implication of this is one can set configuration values that could lead to memory exhaustion during run time as memory is not allocated at startup time.
- (boolean) Turns on innodb_file_per_table option, which will make MySQL put each InnoDB table into separate .idb file. Existing InnoDB tables will remain in ibdata1 file - full dump/import is needed to get rid of large ibdata1 file
- (string) SST account password for new cluster nodes. Overrides the automatic generation of a password for the sst user, but must be set prior to deployment time to have any effect.
- (boolean) Adds two config options (wsrep_drupal_282555_workaround and wsrep_retry_autocommit) as a workaround for Percona Primary Key bug (see LP 1366997). Only required for Trusty.
- (string) Key ID to import to the apt keyring to support use with arbitrary source configuration from outside of Launchpad archives or PPA's.
- (string) By default this value will be set according to 50% of system total memory or 512MB (whichever is lowest) but also can be set to any specific value for the system. Supported suffixes include K/M/G/T. If suffixed with %, one will get that percentage of system total memory allocated.
- (int) Maximum connections to allow. A value of -1 means use the server's compiled-in default. This is not typically that useful so the charm will configure PXC with a default max-connections value of 600. Note: Connections take up memory resources. Either at startup time with performance-schema=True or during run time with performance-schema=False. This value is a balance between connection exhaustion and memory exhaustion. . Consult a MySQL memory calculator like http://www.mysqlcalculator.com/ to understand memory resources consumed by connections. See also performance-schema.
- (boolean) Use DNS HA with MAAS 2.0. Note if this is set do not set vip settings below.
- (string) [DEPRECATED] - use innodb-buffer-pool-size. How much data should be kept in memory in the DB. This will be used to tune settings in the database server appropriately. Supported suffixes include K/M/G/T. If suffixed with %, one will get that percentage of RAM allocated to the dataset.
- (string) Root account password for new cluster nodes. Overrides the automatic generation of a password for the root user, but must be set prior to deployment time to have any effect.
- (int) Netmask that will be used for the Virtual IP.
- (string) Used by the nrpe-external-master subordinate charm. A string that will be prepended to instance name to set the host name in nagios. So for instance the hostname would be something like 'juju-myservice-0'. If you are running multiple environments with the same services in them this allows you to differentiate between them.
- (int) The number of seconds the server waits for activity on a noninteractive connection before closing it. -1 means use the server's compiled in default.
- (string) The hostname or address of the access endpoint for percona-cluster.
- (string) Apply system hardening. Supports a space-delimited list of modules to run. Supported modules currently include os, ssh, apache and mysql.
- (string) Percona method for taking the State Snapshot Transfer (SST), can be: 'rsync', 'xtrabackup', 'xtrabackup-v2', 'mysqldump', 'skip' - see https://www.percona.com/doc/percona-xtradb-cluster/5.5/wsrep-system-index.html#wsrep_sst_method
- (int) Minimum number of units expected to exist before charm will attempt to bootstrap percona cluster. If no value is provided this setting is ignored.
- (boolean) If True enables IPv6 support. The charm will expect network interfaces to be configured with an IPv6 address. If set to False (default) IPv4 is expected. . NOTE: these charms do not currently support IPv6 privacy extension. In order for this charm to function correctly, the privacy extension must be disabled and a non-temporary address must be configured/available on your network interface.