Pinger can verify the network connectivity between its peer units and an
optional configured list of extra-targets. Uses status 'blocked' to signal
connectivity issues or status 'active' when all checks pass correctly.
Pinger is a simple network connectivity checker charm. It is intended to be
deployed with multiple units on all machines you will be using later for a
complex deployment (e.g. OpenStack or Big Data), in order to quickly verify the
connectivity between those machines works as expected.
Each Pinger unit will use
ping(8) to verfiy it can successfully connect each
other peer's addresses, and any configured
extra-targets. Those checks will be
performed regularly (on changing config or number of peers, as well as every 5
After each peer unit performs its checks, a summary will be provided in the
status of the Pinger application. For example, "active OK (all 42 reachable)"
when no connectivity issues were found, or e.g. "blocked FAIL (1 of 42
All checks and their results are logged. On failure, check the unit log:
juju debug-log -i unit-pinger-0 --replay --no-tail -l ERROR
unit-pinger-0 to the see a different unit).
Additionally, inside each unit's charm directory there's a
ping.log file with
all the details ping(8) produced. Get that log like this:
juju run --unit pinger/0 -- 'cat /var/lib/juju/agents/unit-pinger-0/charm/ping.log'
unit-pinger-0 to see the log of another unit).
Deploy to a given machine (e.g. a MAAS node called 'node-42'), like this:
juju deploy cs:~dimitern/pinger --to node-42
Instead of placement with --to, you can also use other criteria, like
constraints and/or endpoint bindings:
juju deploy cs:~dimitern/pinger --constraints 'mem=4G tags=os-nodes' # or e.g. juju deploy cs:~dimitern/pinger --bind 'ep0=admin-api ep1=public-api'
Add more units to new or existing machine, like this:
juju add-unit pinger -n 2 # or e.g. juju add-unit pinger --to node-11
Verify the status output for the overall result of all checks:
juju status pinger
extra-targets after deployment:
juju config pinger extra-targets='google.com 10.14.0.1 184.108.40.206'
You can also do the same during deployment:
juju deploy cs:~dimitern/pinger --config=~/os-pinger-config.yaml
~/os-pinger-config.yaml is a path to a YAML configuration file. An
example config can look like this (for completeness both settings are included):
pinger: extra-targets: "google.com 10.14.0.1 220.127.116.11"
The following configuration settings are supported:
**extra-targets** - a space-delimited list of IP addresses or hostnames to check by each peer, in addition to all addresses of each peer. Empty by default.
As of this writing, this layer does not define any actions.
- Dimiter Naydenov email@example.com