nova compute #264


OpenStack Compute, codenamed Nova, is a cloud computing fabric controller. In
addition to its "native" API (the OpenStack API), it also supports the Amazon
This charm provides the Nova Compute hypervisor service and should be deployed
directly to physical servers.


This charm provides Nova Compute, the Openstack compute service. It's target
platform is Ubuntu (preferably LTS) + Openstack.


The following interfaces are provided:

  • cloud-compute - Used to relate (at least) with one or more of
    nova-cloud-controller, glance, ceph, cinder, mysql, ceilometer-agent,
    rabbitmq-server, neutron

  • nrpe-external-master - Used to generate Nagios checks.


Nova compute only requires database access if using nova-network. If using
Neutron, no direct database access is required and the shared-db relation need
not be added.


This charm support nova-network (legacy) and Neutron networking.


This charm supports a number of different storage backends depending on
your hypervisor type and storage relations.

NFV support

This charm (in-conjunction with the nova-cloud-controller and neutron-api charms)
supports use of nova-compute nodes configured for use in Telco NFV deployments;
specifically the following configuration options (yaml excerpt):

  hugepages: 60%
  vcpu-pin-set: "^0,^2"
  reserved-host-memory: 1024
  pci-passthrough-whitelist: {"vendor_id":"1137","product_id":"0071","address":"*:0a:00.*","physical_network":"physnet1"}

In this example, compute nodes will be configured with 60% of avaliable RAM for
hugepage use (decreasing memory fragmentation in virual machines, improving
performance), and Nova will be configured to reserve CPU cores 0 and 2 and
1024M of RAM for host usage and use the supplied PCI device whitelist as
PCI devices that as consumable by virtual machines, including any mapping to
underlying provider network names (used for SR-IOV VF/PF port scheduling with
Nova and Neutron's SR-IOV support).

The vcpu-pin-set configuration option is a comma-separated list of physical
CPU numbers that virtual CPUs can be allocated to by default. Each element
should be either a single CPU number, a range of CPU numbers, or a caret
followed by a CPU number to be excluded from a previous range. For example:

vcpu-pin-set: "4-12,^8,15"

The pci-passthrough-whitelist configuration must be specified as follows:

A JSON dictionary which describe a whitelisted PCI device. It should take
the following format:

["device_id": "<id>",] ["product_id": "<id>",]
["address": "[[[[<domain>]:]<bus>]:][<slot>][.[<function>]]" |
"devname": "PCI Device Name",]
{"tag": "<tag_value>",}

where '[' indicates zero or one occurrences, '{' indicates zero or multiple
occurrences, and '|' mutually exclusive options. Note that any missing
fields are automatically wildcarded. Valid examples are:

pci-passthrough-whitelist: {"devname":"eth0", "physical_network":"physnet"}

pci-passthrough-whitelist: {"address":"*:0a:00.*"}

pci-passthrough-whitelist: {"address":":0a:00.", "physical_network":"physnet1"}

pci-passthrough-whitelist: {"vendor_id":"1137", "product_id":"0071"}

pci-passthrough-whitelist: {"vendor_id":"1137", "product_id":"0071", "address": "0000:0a:00.1", "physical_network":"physnet1"}

The following is invalid, as it specifies mutually exclusive options:

pci-passthrough-whitelist: {"devname":"eth0", "physical_network":"physnet", "address":"*:0a:00.*"}

A JSON list of JSON dictionaries corresponding to the above format. For

pci-passthrough-whitelist: [{"product_id":"0001", "vendor_id":"8086"}, {"product_id":"0002", "vendor_id":"8086"}]`

The OpenStack advanced networking documentation
provides further details on whitelist configuration and how to create instances
with Neutron ports wired to SR-IOV devices.


(string) Experimental enable apparmor profile. Valid settings: 'complain', 'enforce' or 'disable'. AA disabled by default.
(string) YAML formatted associative array of sysctl values, e.g.: '{ kernel.pid_max : 4194303 }'
(string) Sets vcpu_pin_set option in nova.conf which defines which pcpus that instance vcpus can or cannot use. For example '^0,^2' to reserve two cpus for the host.
(string) Bridge interface to be configured
(string) Set to 'host-model' to clone the host CPU feature flags; to 'host-passthrough' to use the host CPU model exactly; to 'custom' to use a named CPU model; to 'none' to not set any CPU model. If virt_type='kvm|qemu', it will default to 'host-model', otherwise it will default to 'none'. Defaults to 'host-passthrough' for ppc64el, ppc64le if no value is set.
(string) Only used when migration-auth-type is set to ssh. . Full path to authorized_keys file, can be useful for systems with non-default AuthorizedKeysFile location. It will be formatted using the following variables: . homedir - user's home directory username - username .
(string) Network interface on which to build bridge
(string) Full path to Nova configuration file.
(string) Virtualization flavor. Supported flavors are: kvm, xen, uml, lxc, qemu, lxd.
(string) Sets the pci_passthrough_whitelist option in nova.conf with is used to allow pci passthrough to the VM of specific devices, for example for SR-IOV.
(boolean) Setting this to True will allow supporting services to log to syslog.
(string) Netmask to be assigned to bridge interface
(boolean) Enable verbose logging.
(string) Tell Nova which libvirt image backend to use. Supported backends are rbd, lvm and qcow2. If no backend is specified, the Nova default (qcow2) is used. Note that rbd imagebackend is only supported with >= Juno.
(string) Comma-separated list of key=value config flags. These values will be placed in the nova.conf [DEFAULT] section.
(string) Username used to access rabbitmq queue.
(string) IP to be assigned to bridge interface
(string) Specific cachemodes to use for different disk types e.g: file=directsync,block=none
(boolean) If True enables IPv6 support. The charm will expect network interfaces to be configured with an IPv6 address. If set to False (default) IPv4 is expected. NOTE: these charms do not currently support IPv6 privacy extension. In order for this charm to function correctly, the privacy extension must be disabled and a non-temporary address must be configured/available on your network interface.
(string) A comma-separated list of nagios servicegroups. If left empty, the nagios_context will be used as the servicegroup.
(boolean) Enable instance resizing, which requires that passwordless SSH access be setup between compute hosts.
(boolean) Configure libvirt or lxd for live migration. Live migration support for lxd is still considered experimental.
(boolean) If True enables openstack upgrades for this charm via juju actions. You will still need to set openstack-origin to the new repository but instead of an upgrade running automatically across all units, it will wait for you to execute the openstack-upgrade action for this charm on each unit. If False it will revert to existing behavior of upgrading all units on config change.
(string) Repository from which to install. May be one of the following: distro (default), ppa:somecustom/ppa, a deb url sources entry or a supported Ubuntu Cloud Archive (UCA) release pocket. . Supported UCA sources include: . cloud:<series>-<openstack-release> cloud:<series>-<openstack-release>/updates cloud:<series>-<openstack-release>/staging cloud:<series>-<openstack-release>/proposed . For series=Precise we support UCA for openstack-release= * icehouse . For series=Trusty we support UCA for openstack-release= * juno * kilo * ... . NOTE: updating this setting to a source that is known to provide a later version of OpenStack will trigger a software upgrade. .
(boolean) Openstack mostly defaults to using public endpoints for internal communication between services. If set to True this option will configure services to use internal endpoints where possible.
(string) Whether to run nova-api and nova-network on the compute nodes.
(boolean) If True nova-compute will install neutron packages for the plugin stipulated by nova-cloud-controller. The option is only available for backward compatibility for deployments which do not use the neutron-api charm. Please do not enable this on new deployments.
(string) TCP authentication scheme for libvirt live migration. Available options include ssh.
(int) This value dictates the number of replicas ceph must make of any object it stores withing the nova rbd pool. Of course, this only applies if using Ceph as a backend store. Note that once the nova rbd pool has been created, changing this value will not have any effect (although it can be changed in ceph by manually configuring your ceph cluster).
(string) Path used for storing Nova instances data - empty means default of /var/lib/nova/instances.
(string) Nova database name.
(string) Specifies a default OpenStack release name, or a YAML dictionary listing the git repositories to install from. The default Openstack release name may be one of the following, where the corresponding OpenStack github branch will be used: * liberty * mitaka * master The YAML must minimally include requirements, neutron, and nova repositories, and may also include repositories for other dependencies: repositories: - {name: requirements, repository: 'git://', branch: master} - {name: neutron, repository: 'git://', branch: master} - {name: nova, repository: 'git://', branch: master release: master
(string) Enable/disable rbd client cache. Leaving this value unset will result in default Ceph rbd client settings being used (rbd cache is enabled by default for Ceph >= Giant). Supported values here are "enabled" or "disabled".
(string) Used by the nrpe-external-master subordinate charm. A string that will be prepended to instance name to set the host name in nagios. So for instance the hostname would be something like: . juju-myservice-0 . If you're running multiple environments with the same services in them this allows you to differentiate between them.
(string) The pecentage of system memory to use for hugepages eg '10%' or the total number of 2M hugepages - eg "1024". For a systemd system (wily and later) the prefered approach is to enable hugepages via kernel parameters set in MAAS and systemd will mount them automatically.
(string) RBD pool to use with Nova libvirt RBDImageBackend. Only required when you have libvirt-image-backend set to 'rbd'.
(string) Apply system hardening. Supports a space-delimited list of modules to run. Supported modules currently include os, ssh, apache and mysql.
(string) Rabbitmq vhost.
(int) Amount of memory in MB to reserve for the host. Defaults to 512MB.
(string) Set to a named libvirt CPU model (see names listed in /usr/share/libvirt/cpu_map.xml). Only has effect if cpu_mode='custom' and virt_type='kvm|qemu'.
(boolean) Enable debug logging.
(string) Username for database access.