Marcoceppi Oai Enb

Learn about configurations >

• N_RB_DL | int

  Default: 25

  Setting this option to ..........

• TAC | int

  Default: 1

  Set this option to the tracking area code you want this eNB to belong. Possible values are...Tracking area code, 0x0000 and 0xfffe are reserved values

• branch | string

  Default: develop

  branch indicates which installation you want to do. If you want an stable installation, change this option to "default".

• config_file | string

  Default: default

  takes the default configuration file based on the target hardware. It defines the specific enb configuration file, see openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF.

• downlink_frequency | string

  Default: 2680000000L

  Setting this option to ..........

• enb_id | string

  Default: 0xe00

  Set this option with the id number you want for this eNodeB deployment.

• enb_name | string

  Default: eNB_Eurecom_LTEBox

  Set this option with the name you want for this eNodeB deployment.

• eth | string

  Default: eth1

  defines the interface to the EPC. Set this option to the interface the machine onto you deploy this charm has.

• eutra_band | int

  Default: 7

  Setting this option to ..........

• frame_type | string

  Default: FDD

  Setting this option to ..........

• nb_antennas_rx | int

  Default: 1

  Setting this option to ..........

• nb_antennas_tx | int

  Default: 1

  Setting this option to ..........

• rrh_active | string

  Default: yes:

  activates fronthaul interface to the RRH gateway.

• rrh_if_name | string

  Default: lo

  defines the network interface name to connect to the RRH.

• rrh_local_port | int

  Default: 50000

  defines the network interface port to connect to the RRH

• rrh_transport_mode | string

  Default: raw

  defines the I/Q sample transport mode. Available mode are udp and raw. If udp, the ip address is expected

• rrh_tx_sampleadvance | int

  Default: 113

  defines the tx i/q sample advace

• rrh_tx_schedadvance | int

  Default: 9

  defines the tx i/q scheduling advance

• rrh_tx_shift | int

  Default: 5

  defines the shift in is samples in tx

• rx_gain | int

  Default: 120

  Setting this option to ..........

• target_hardware | string

  Default: usrp

  defines the target RF hardware. Available Options: usrp, bladerf, and sodera. Setting this option will require different configuration file and wil trigger different building process.

• tdd_config | int

  Default: 3

  Setting this option to ..........

• tdd_config_s | int

  Setting this option to ..........

• tx_gain | int

  Default: 90

  Setting this option to ..........

• uplink_frequency_offset | string

  Default: -120000000

  Setting this option to ..........