Navid Nikaein Oai Rru Snap

Learn about configurations >

• N_RB_DL | int

  Default: 25

  Setting the bandwidth in terms of number of available PRBS, 5MHz (25), 10MHz(50), and 20MHz(100).

• config_file | string

  Default: default

  takes the default configuration file based on the target hardware. It defines the specific enb configuration file, see openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF.

• eutra_band | int

  Default: 13

  Setting the LTE EUTRA frequency band.

• fh_transport_mode | string

  Default: udp_if4p5

  defines the RRU I/Q sample transport mode. Available mode are raw, udp, raw_if4p5, and udp_if4p5.

• node_function | string

  Default: NGFI_RRU_IF4p5

  set the function of this node. Available Options: NGFI_RRU_IF5 (NGFI remote radio-unit,IF5), NGFI_RRU_IF4p5 (NGFI remote radio-unit,IF4p5).

• passwd | string

  Default: linux

  defines the password to access the RRU machine.

• rru_ip | string

  Default: 172.27.61.4

  defines the ip address of the RRU machine. This is the same address as the one used for fronthaul.

• rru_port | int

  Default: 50000

  defines the network interface port to connect to the RRU.

• target_hardware | string

  Default: usrp_b200

  defines the target RF hardware. Available Options: usrp_b200, usrp_x310, lmsdr, blader. Setting this option will require different configuration file and will trigger different building process.

• user_name | string

  Default: mosaic5g

  defines the user name to access the RRU machine.