Navid Nikaein Oai Spgw
- By navid nikaein
Channel | Revision | Published | Runs on |
---|---|---|---|
latest/stable | 37 | 19 Mar 2021 |
juju deploy navid-nikaein-oai-spgw
Deploy universal operators easily with Juju, the Universal Operator Lifecycle Manager.
Platform:
-
DEFAULT_DNS_IPV4_ADDRESS | string
Default: 127.0.0.1
IPv4 address of primary default DNS that can be queried by UEs. If the value of DEFAULT_DNS_IPV4_ADDRESS is 127.0.0.1, the DNS will be detected automatically
-
DEFAULT_DNS_SEC_IPV4_ADDRESS | string
Default: 8.8.8.8
IPv4 address of secondary default DNS that can be queried by UEs.
-
ipv4_list_end | string
Default: 172.16.0.0/12
Second IPv4 address pool that will be assigned to UEs.
-
ipv4_list_start | string
Default: 172.16.0.0/12
First IP address pool that will be assigned to UEs.
-
ipv6_list | string
Default: 2014:02:26::0/120
First IPv6 addresse pool available to be assigned to UEs.
-
pgw-eth | string
Default: none
If the value of this interface is "none", the interface name will be detected authomatically This is usefull especially when you are in manual environment so you have your own machines. The default value is eth0. NO empty value.
-
pgw_masquerade_sgi | string
Default: yes
enable P-GW masquerading for SGI interface
-
sgw-eth | string
Default: none
If the value of this interface is "none", the interface name will be detected authomatically This is usefull especially when you are in manual environment so you have your own machines. The default value is eth0. NO empty value.
-
snap | string
Default: edge
snap indicates which channel to use for installation hook.
-
ue_mtu | int
Default: 1428
set the LTE UE MTU