admin-roles | string

Default: Admin

Comma-separated list of Swift admin roles; used when integrating with OpenStack Keystone. Admin roles can set the user quota amount.

bluestore-compression-algorithm | string

Compressor to use (if any) for pools requested by this charm. . NOTE: The ceph-osd charm sets a global default for this value (defaults to 'lz4' unless configured by the end user) which will be used unless specified for individual pools.

bluestore-compression-max-blob-size | int

Chunks larger than this are broken into smaller blobs sizing bluestore compression max blob size before being compressed on pools requested by this charm.

bluestore-compression-max-blob-size-hdd | int

Value of bluestore compression max blob size for rotational media on pools requested by this charm.

bluestore-compression-max-blob-size-ssd | int

Value of bluestore compression max blob size for solid state media on pools requested by this charm.

bluestore-compression-min-blob-size | int

Chunks smaller than this are never compressed on pools requested by this charm.

bluestore-compression-min-blob-size-hdd | int

Value of bluestore compression min blob size for rotational media on pools requested by this charm.

bluestore-compression-min-blob-size-ssd | int

Value of bluestore compression min blob size for solid state media on pools requested by this charm.

bluestore-compression-mode | string

Policy for using compression on pools requested by this charm. . 'none' means never use compression. 'passive' means use compression when clients hint that data is compressible. 'aggressive' means use compression unless clients hint that data is not compressible. 'force' means use compression under all circumstances even if the clients hint that the data is not compressible.

bluestore-compression-required-ratio | float

The ratio of the size of the data chunk after compression relative to the original size must be at least this small in order to store the compressed version on pools requested by this charm.

cache-size | int

Default: 500

Number of keystone tokens to hold in local cache.

ceph-osd-replication-count | int

Default: 3

This value dictates the number of replicas ceph must make of any object it stores within RGW pools. Note that once the RGW pools have been created, changing this value will not have any effect (although it can be changed in ceph by manually configuring your ceph cluster).

config-flags | string

User provided Ceph configuration. Supports a string representation of a python dictionary where each top-level key represents a section in the ceph.conf template. You may only use sections supported in the template. . WARNING: this is not the recommended way to configure the underlying services that this charm installs and is used at the user's own risk. This option is mainly provided as a stop-gap for users that either want to test the effect of modifying some config or who have found a critical bug in the way the charm has configured their services and need it fixed immediately. We ask that whenever this is used, that the user consider opening a bug on this charm at http://bugs.launchpad.net/charms providing an explanation of why the config was needed so that we may consider it for inclusion as a natively supported config in the charm.

dns-ha | boolean

Use DNS HA with MAAS 2.0. Note if this is set do not set vip settings below.

ec-profile-crush-locality | string

(lrc plugin) The type of the crush bucket in which each set of chunks defined by l will be stored. For instance, if it is set to rack, each group of l chunks will be placed in a different rack. It is used to create a CRUSH rule step such as step choose rack. If it is not set, no such grouping is done.

ec-profile-device-class | string

Device class from CRUSH map to use for placement groups for erasure profile - valid values: ssd, hdd or nvme (or leave unset to not use a device class).

ec-profile-durability-estimator | int

(shec plugin - c) The number of parity chunks each of which includes each data chunk in its calculation range. The number is used as a durability estimator. For instance, if c=2, 2 OSDs can be down without losing data.

ec-profile-helper-chunks | int

(clay plugin - d) Number of OSDs requested to send data during recovery of a single chunk. d needs to be chosen such that k+1 <= d <= k+m-1. Larger the d, the better the savings.

ec-profile-k | int

Default: 1

Number of data chunks that will be used for EC data pool. K+M factors should never be greater than the number of available zones (or hosts) for balancing.

ec-profile-locality | int

(lrc plugin - l) Group the coding and data chunks into sets of size l. For instance, for k=4 and m=2, when l=3 two groups of three are created. Each set can be recovered without reading chunks from another set. Note that using the lrc plugin does incur more raw storage usage than isa or jerasure in order to reduce the cost of recovery operations.

ec-profile-m | int

Default: 2

Number of coding chunks that will be used for EC data pool. K+M factors should never be greater than the number of available zones (or hosts) for balancing.

ec-profile-name | string

Name for the EC profile to be created for the EC pools. If not defined a profile name will be generated based on the name of the pool used by the application.

ec-profile-plugin | string

Default: jerasure

EC plugin to use for this applications pool. The following list of plugins acceptable - jerasure, lrc, isa, shec, clay.

ec-profile-scalar-mds | string

(clay plugin) specifies the plugin that is used as a building block in the layered construction. It can be one of jerasure, isa, shec (defaults to jerasure).

ec-profile-technique | string

EC profile technique used for this applications pool - will be validated based on the plugin configured via ec-profile-plugin. Supported techniques are ‘reed_sol_van’, ‘reed_sol_r6_op’, ‘cauchy_orig’, ‘cauchy_good’, ‘liber8tion’ for jerasure, ‘reed_sol_van’, ‘cauchy’ for isa and ‘single’, ‘multiple’ for shec.

ec-rbd-metadata-pool | string

Name of the metadata pool to be created (for RBD use-cases). If not defined a metadata pool name will be generated based on the name of the data pool used by the application. The metadata pool is always replicated, not erasure coded.

ha-bindiface | string

Default: eth0

Default network interface on which HA cluster will bind to communication with the other members of the HA Cluster.

ha-mcastport | int

Default: 5414

Default multicast port number that will be used to communicate between HA Cluster nodes.

haproxy-client-timeout | int

Client timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 90000ms is used.

haproxy-connect-timeout | int

Connect timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 9000ms is used.

haproxy-queue-timeout | int

Queue timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 9000ms is used.

haproxy-server-timeout | int

Server timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 90000ms is used.

harden | string

Apply system hardening. Supports a space-delimited list of modules to run. Supported modules currently include os, ssh, apache and mysql.

http-frontend | string

Frontend HTTP engine to use for the Ceph RADOS Gateway; For Octopus and later this defaults to 'beast' and for older releases (and on architectures where beast is not supported) 'civetweb'.

key | string

Key ID to import to the apt keyring to support use with arbitary source configuration from outside of Launchpad archives or PPA's.

loglevel | int

Default: 1

RadosGW debug level. Max is 20.

nagios_context | string

Default: juju

Used by the nrpe-external-master subordinate charm. A string that will be prepended to instance name to set the host name in nagios. So for instance the hostname would be something like: . juju-myservice-0 . If you're running multiple environments with the same services in them this allows you to differentiate between them.

nagios_servicegroups | string

A comma-separated list of nagios servicegroups. If left empty, the nagios_context will be used as the servicegroup

namespace-tenants | boolean

Enable tenant namespacing. If tenant namespacing is enabled, keystone tenants will be implicitly added to a matching tenant in radosgw, in addition to updating the catalog URL to allow radosgw to support publicly-readable containers and temporary URLS. This namespacing also allows multiple tenants to create buckets with the same names, as the bucket names are namespaced into the tenant namespaces in the RADOS gateway. This configuration option will not be enabled on a charm upgrade, and cannot be toggled on in an existing installation as it will remove tenant access to existing buckets.

operator-roles | string

Default: Member,member

Comma-separated list of Swift operator roles; used when integrating with OpenStack Keystone.

os-admin-hostname | string

The hostname or address of the admin endpoints created for ceph-radosgw in the keystone identity provider. . This value will be used for admin endpoints. For example, an os-admin-hostname set to 'files.admin.example.com' with will create the following admin endpoint for the ceph-radosgw: . https://files.admin.example.com:80/swift/v1

os-admin-network | string

The IP address and netmask of the OpenStack Admin network (e.g. 192.168.0.0/24) . This network will be used for admin endpoints.

os-internal-hostname | string

The hostname or address of the internal endpoints created for ceph-radosgw in the keystone identity provider. . This value will be used for internal endpoints. For example, an os-internal-hostname set to 'files.internal.example.com' with will create the following internal endpoint for the ceph-radosgw: . https://files.internal.example.com:80/swift/v1

os-internal-network | string

The IP address and netmask of the OpenStack Internal network (e.g. 192.168.0.0/24) . This network will be used for internal endpoints.

os-public-hostname | string

The hostname or address of the public endpoints created for ceph-radosgw in the keystone identity provider. . This value will be used for public endpoints. For example, an os-public-hostname set to 'files.example.com' with will create the following public endpoint for the ceph-radosgw: . https://files.example.com:80/swift/v1

os-public-network | string

The IP address and netmask of the OpenStack Public network (e.g. 192.168.0.0/24) . This network will be used for public endpoints.

pool-prefix | string

DEPRECATED, use zone instead - pool name can be inherited from the zone config option. The rados gateway stores objects in many different pools. If you would like to have multiple rados gateways each pointing to a separate set of pools set this prefix. The charm will then set up a new set of pools. If your prefix has a dash in it that will be used to split the prefix into region and zone. Please read the documentation on federated rados gateways for more information on region and zone.

pool-type | string

Default: replicated

Ceph pool type to use for storage - valid values include ‘replicated’ and ‘erasure-coded’.

port | int

The port that the RADOS Gateway will listen on. . The default is 80 when no TLS is configured and 443 when TLS is configured.

prefer-ipv6 | boolean

If True enables IPv6 support. The charm will expect network interfaces to be configured with an IPv6 address. If set to False (default) IPv4 is expected. . NOTE: these charms do not currently support IPv6 privacy extension. In order for this charm to function correctly, the privacy extension must be disabled and a non-temporary address must be configured/available on your network interface.

realm | string

Name of RADOS Gateway Realm to create for multi-site replication. Setting this option will enable support for multi-site replication, at which point the zonegroup and zone options must also be provided.

region | string

Default: RegionOne

OpenStack region that the RADOS gateway supports; used when integrating with OpenStack Keystone.

restrict-ceph-pools | boolean

Optionally restrict Ceph key permissions to access pools as required.

rgw-buckets-pool-weight | int

Default: 20

Defines a relative weighting of the pool as a percentage of the total amount of data in the Ceph cluster. This effectively weights the number of placement groups for the pool created to be appropriately portioned to the amount of data expected. For example, if the amount of data loaded into the RADOS Gateway/S3 interface is expected to be reserved for or consume 20% of the data in the Ceph cluster, then this value would be specified as 20.

rgw-lightweight-pool-pg-num | int

Default: -1

When the Rados Gatway is installed it, by default, creates pools with pg_num 8 which, in the majority of cases is suboptimal. A few rgw pools tend to carry more data than others e.g. .rgw.buckets tends to be larger than most. So, for pools with greater requirements than others the charm will apply the optimal value i.e. corresponding to the number of OSDs up+in the cluster at the time the pool is created. For others it will use this value which can be altered depending on how big you cluster is. Note that once a pool has been created, changes to this setting will be ignored. Setting this value to -1, enables the number of placement groups to be calculated based on the Ceph placement group calculator.

rgw-swift-versioning-enabled | boolean

If True, swift object versioning will be enabled for radosgw. NOTE: X-Versions-Location is the only versioning-related header that radosgw interprets. X-History-Location, supported by native OpenStack Swift, is currently not supported by radosgw.

source | string

Optional repository from which to install. May be one of the following: distro (default), ppa:somecustom/ppa, a deb url sources entry, or a supported Ubuntu Cloud Archive e.g. . cloud:<series>-<openstack-release> cloud:<series>-<openstack-release>/updates cloud:<series>-<openstack-release>/staging cloud:<series>-<openstack-release>/proposed . See https://wiki.ubuntu.com/OpenStack/CloudArchive for info on which cloud archives are available and supported. . Note that a minimum ceph version of 0.48.2 is required for use with this charm which is NOT provided by the packages in the main Ubuntu archive for precise but is provided in the Ubuntu cloud archive.

ssl_ca | string

SSL CA to use with the certificate and key provided - this is only required if you are providing a privately signed ssl_cert and ssl_key.

ssl_cert | string

SSL certificate to install and use for API ports. Setting this value and ssl_key will enable reverse proxying, point Glance's entry in the Keystone catalog to use https, and override any certificate and key issued by Keystone (if it is configured to do so).

ssl_key | string

SSL key to use with certificate specified as ssl_cert.

use-syslog | boolean

If set to True, supporting services will log to syslog.

vip | string

Virtual IP(s) to use to front API services in HA configuration. . If multiple networks are being used, a VIP should be provided for each network, separated by spaces.

zone | string

Default: default

Name of RADOS Gateway Zone to create for multi-site replication. This option must be specific to the local site e.g. us-west or us-east.

zonegroup | string

Name of RADOS Gateway Zone Group to create for multi-site replication.

Channel	Revision	Published	Runs on
latest/stable	1339	09 Feb 2022	Ubuntu 21.10 Ubuntu 20.04
latest/edge	688	19 Mar 2021	Ubuntu 15.10

Openstack Charmers Next Ceph Radosgw